SURE SEAL SILICONE

9601 Sure Seal Seam Compound

Seal & waterproof fasteners, cracks, seams and penetrations with 9601 Sure Seal Seam Compound. It is a high solid, low VOC, one-part silicone elastomeric flashing grade specifically designed for use in sealing roof penetrations, curbs, seams, flashing areas and any other areas of possible water infiltration. 9601 is the sealant of choice for any roof system that has been previously coated with a silicone elastomeric coating.

Once applied, 9601 Sure Seal Seam Compound silicone flashing grade provides a durable, seamless and flexible system that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, TRUCO's 9601 provides greater waterproofing protection than similar flashing grade silicone sealants and offers increased resistance to moisture penetration.

Durability—Cured silicone rubber exhibits excellent long-term resistance to natural weathering including: extreme temperatures, ultraviolet radiation, rain and snow.

High Build Formulation—Low sag

Ease of Use—Single component applied by trowel or brush.

42" x 324'
12" x 300'
6" x 300'
4" x 300'
20 oz Sausage Tube
11 oz Sausage Tube
55 gallons
50 gallons
5 gallons
2 gallons
1 gallon
0.5 gallon pouch

Black
Grey
White

Resource Downloads

View All Documents

Applicable Roof Types

Metal Roof

With prolonged exposure to sun and weather, metal roofing systems inevitably deteriorate overtime — developing leaks, rust and corrosion. Years of heat-related expansion and contraction also loosen seams and fasteners, potentially damaging the roof and building structure. Whether you have a new metal roof or one in need of reinforcements, you can protect it and extend its lifespan with TRUCO Coatings easy-to-apply SEBS and Silicone roof coatings.

Hypalon Single-Ply Roofs

Continuous UV exposure is tough on Hypalon (CSPE) roofs. The sun and heat can cause heavy chalking and surface cracks, as well as pinholes in the membrane. The good news is that you don’t have to take on the cost of a complete tear-off and replacement. If your Hypalon roof is a good candidate, our SEBS coating systems provide an excellent solution to cover reinforcement scrim, protect against surface cracks and seal out moisture.

EPDM Single-Ply Roofs

EPDM roofing is prone to leaks at the seams and penetrations due to foot traffic and weather exposure. Whether your EPDM roof is new or needs amore intense restoration, protect it with the high tensile strength of ourdurable EPDM roof coating systems.

TPO Single-Ply Roofs

Prolonged exposure to UV radiation from the sun can take a toll on TPO single-ply roofing systems,causing them to chalk heavily and develop pinholes and surface cracks. When the reinforcement scrim is exposed, the roofing membrane fails. TRUCO Coatings elastomeric roof coating not only protects TPO roofing from the sun, but also resists moisture and extreme weather for lasting durability. Silicone solutions for commercial building roofs provide long-lasting leak protection.

Modified Bitumen and BUR Roofs

When it comes to Modified Bitumen (MB) or Built-Up (BUR) roofs, constant sun and heat are your worst enemies. Prolonged heat and sun exposure weaken and deteriorate thesubstrate, creating significant leakage and moisture. Protect your MB or BURroof from UV exposure and lengthen the life of your roof with TRUCO Coatings SEBS and Silicone roof coatings.

Get in touch with us.

Awesome Coatings are waiting.