8100 is a water-based rust inhibiting, environmentally friendly roofing primer, developed to be used on corroded metal substrates.
8100 Acrylic Rust Inhibitor can be applied as a primer for a variety of other roof coatings as well. 8100 Acrylic Rust Inhibitor has excellent resistance to heat, cold, moisture and weathering. It will cure quickly to allow the base coat to be applied soon after application. 8100 is used as a primer coat over primarily metal surfaces but can be also be applied to a wide range of substrates which include, but are not limited to wood, metal, concrete, masonry, various single ply membranes, spray polyurethane foam and most commonly used roof coatings. It is pigmented gray to speed the curing process and increase roof surface temperature before application of spray polyurethane foam or roof coatings.
Excellent resistance to heat, cold, moisture & weathering.
This primer sets up quickly to allow the base coat to be applied soon after application.
With prolonged exposure to sun and weather, metal roofing systems inevitably deteriorate overtime — developing leaks, rust and corrosion. Years of heat-related expansion and contraction also loosen seams and fasteners, potentially damaging the roof and building structure. Whether you have a new metal roof or one in need of reinforcements, you can protect it and extend its lifespan with TRUCO Coatings easy-to-apply SEBS and Silicone roof coatings.
EPDM roofing is prone to leaks at the seams and penetrations due to foot traffic and weather exposure. Whether your EPDM roof is new or needs amore intense restoration, protect it with the high tensile strength of ourdurable EPDM roof coating systems.
Continuous UV exposure is tough on Hypalon (CSPE) roofs. The sun and heat can cause heavy chalking and surface cracks, as well as pinholes in the membrane. The good news is that you don’t have to take on the cost of a complete tear-off and replacement. If your Hypalon roof is a good candidate, our SEBS coating systems provide an excellent solution to cover reinforcement scrim, protect against surface cracks and seal out moisture.
When it comes to Modified Bitumen (MB) or Built-Up (BUR) roofs, constant sun and heat are your worst enemies. Prolonged heat and sun exposure weaken and deteriorate thesubstrate, creating significant leakage and moisture. Protect your MB or BURroof from UV exposure and lengthen the life of your roof with TRUCO Coatings SEBS and Silicone roof coatings.
Spray Polyurethane Foam (SPF) roofing systems are greatly affected by wind, sunlight, moisture, humidity and the roof’s surface temperature. Our roof coating systems offer an easy-to-apply solution to protect your SPF roof from damage and deterioration. Save money on a full tear-off with strong, flexible SEBS and Silicone roof coatings from TRUCO Coatings — and ensure your roof can withstand harsh weather conditions for years to come.
Prolonged exposure to UV radiation from the sun can take a toll on TPO single-ply roofing systems,causing them to chalk heavily and develop pinholes and surface cracks. When the reinforcement scrim is exposed, the roofing membrane fails. TRUCO Coatings elastomeric roof coating not only protects TPO roofing from the sun, but also resists moisture and extreme weather for lasting durability. Silicone solutions for commercial building roofs provide long-lasting leak protection.
Get in touch with us.